Options

  Options  FS110 OP1 FS130 OP2 FS150 AWP FS310 OP1 FS330 OP2 FS350 AWP FS39x OP3
  Pallet loading ramp, transpallet Θ Θ Θ Θ Θ Θ Θ
  Pallet loading ramp, electrical truck Θ Θ Θ Θ Θ Θ Θ
  Loading ramp Θ Θ Θ Θ Θ Θ Θ
  Pitoption Θ Θ Θ Θ Θ Θ Θ
  Photocell for black film / dark products Θ Θ Θ Θ Θ Θ
  Topsheet dispenser - - - - - - Θ
  Cutting device - - - - - - Θ
  Toppress unit Θ Θ Θ Θ Θ Θ Θ
  Frame for subrerged floor nounting Θ Θ Θ Θ Θ Θ Θ
  Motor with shock absorber - - - ӿ ӿ ӿ
  Integrated scale unit - - -
  Upper film Θ Θ Θ Θ Θ Θ Θ
  Trolly guide  Θ Θ Θ Θ Θ Θ Θ
  Film clamp Θ Θ Θ Θ Θ Θ Θ

                       √    standard           Θ   optional           ◊   turntable Ø 1.650/1.800mm            ӿ    turntable Ø 1.800/2.200 mm (opt in 1500/1650 mm)          -    not available

 

                                                                                                                                                                                                                                                                                                              

 

HORSESHOE  TURNTABLE        LOADING RAMPS    

Space saving open turntable;
The optional open turntable makes loading with a hand pallet truck easy, specially where floor space is limited;

Equipped with an integrated walk-on safety device which stops the turntable when an object is recognized in the working area;                                              Datasheet

HORSESHOE  TURNTABLE   For machines with turntable:
        diameter Ø 1500 / Ø 1650 / Ø 1800 /Ø 2200 mm
Max weight up to 2.000 kg, depends on the version 

Construction: Solid construction in 4-5-6 mm steel. 
Guaranteed long life time, quality according FROMM design.

                                                               Datasheet

LOADING RAMPS

                                                                                                                                                                                                                                                                                                                            

  

Frame for submerged floor mounting      MOTOR GROUP WITH SHOCK ABSORBER   

For Turntables:  Ø 1.500 / Ø 1.650 / Ø 1.800 / Ø 2.200 mm

For Turntables:  Ø 1.650  /Ø 1,800 mm with scales 

                                                                Datasheet

FRAME FOR SUBMERGED FLOOR MOUNTING  

Patented by FROMM 16.8671 
FS3xx:        standard with turntable Ø 1.800 /2.000mm  
                    optional with turntable Ø 1.500 / 1.650 mm  
FS39x:        for all tables
Impossible: FS1xx and  “Horseshoe“ turntables

                                                                Datasheet

 MOTOR GROUP WITH SHOCK ABSORBER
                                                                                                                                                                                                                                                                                                                          
         
INTEGRATED SCALE UNIT         TOPPRESS (top pressure/stabilization) for lightweight pallets 
With a digital display; 
For tables:  Ø 1,650/ Ø 1,800 / Ø 2,200 mm, an increase of the table: 25 cm;

Rigid robust structure, long life;
Scales: 0-2,000 kg, by 0.5 kg;
The scales are integrated into the table.

They cannot be installed additionally; only the entire table can be replaced!!!!                                       Datasheet

 INTEGRATED SCALE UNIT      Press is motorized;
No air required,no pull limitations; 
Manually plate movement up /down using the pushbuttons
Cycles: semiautomatic FS1xx/FS3xx
             fully automatic cycle on FS390;
The pressure is controlled by a frequency converter; 
The pressure on the top pallet can be adjusted via sensor and installed bracket ;                                          Datasheet
TOPPRESS (top pressure / stabilization) for lightweight pallets     
                                                                                                                                                                                                                                                                                                                              
         
CUTTING UNIT for FS39x only          TOP SHEET DISPENSER  
The system cuts the film after every cycle – time saving;
Per program can be selected if film will be cut in automatic way; Film length after cut can be selected;
Many parameters can be pre-installed to insure to optimal working system;
(Big variaty in dimension of pallets is not advisable)                                                                                 Datasheet
 Fromm wrapping machines - Cutting unit   Top sheet dispenser is a film roll holder to be instaled on the side of the column. It help to positioned the film over the top of the pallet;

The film protects the pallets against moisture and dust;
the film on the top of a pallet is sealed at the edgess with the last few turns of the stretch film.                Datasheet

FROMM _ TOP SHEET DISPENSER 
                                                                                                                                                                                                                                                                                                                              
         
FILM CLAMP      16.8610     TROLLY GUIDE PROFILES TURNTABLE 16.8677    

Film clamp installed on top of the turntable;
This will enable to connect the stretch film easily and quickly to a pallet;
A semi-automatic system. You have to hook the stretchfilm yourself;                                                    Datasheet

FILM CLAMP   Special guides to hold your roll container during wrapping;
Adjustable on wheelbase and lenght; Weels max widt of 45 mm;  To be used fixed mounted or flexible;
To be used on all FROMM Stretchwrappers diameter 1.500 / 1.650 / 1.800mm
Mounting size: Distance 1.000mm/2x hole 8mm Datasheet 
TROLLY GUIDE PROFILES TURNTABLE

                                                                                                                                                                                                                                                                                                              


back to: Components FS