FS5xx Serie with FREE ROTATING ARM"

Rotating arm wrappers, free standing or wall mounted, simple, reliable, easy to use.
The pallet is positioned under the machine or conveyor line;  the arm then rotates the film around the pallet.
Particular emphasis was placed on quality, safety and reliability. This machine has been designed to cope with a high workload.

Fromm recommended FS5xx machines especialy for customers who need
              wrap very heavy, very light or unstable loads, where a rotating turntable machine is inappropriate  
              if it is difficult to move the pallets with trans pallet or forklift truck
              if the customer is forced to use every cm² of warehouse, to stock goods and pallets during crisis hours.

You can choose
             a simple operating panel or one with no less than 99 wrapping programs, pre-set wrapping cycles, the possibility of programming
             carriage with electromagnetic film brake,  1-Motor or  2-Motor driven pre-stretch unit 
             various options

FS5xx Serie with FREE ROTATING ARM

A brief list of the benefits                                             

2 OP pannels,  3 prestretch -systems, stretch up to 350%

Various combinations (OP1 / OP2, Carriages C4 / C6/ C7 )

Machine functions adjustable on the easy to operate control panel

99 wrapping programs

Pallet height 2.200 mm / 2.500mm / 2.800mm / 3.200mm

Options such as toppress - Roping system - Cutting device - Low bottom wrap - Clamp  

The arm is gear driven not chain driven - this results in a more robust construction with less wear and less backlash

The leading edge of the rotating arm has a crash sensor so anyone/anything in the path of the arm is protected against damage

Integration in a semi automatic wrapping line with conveyors possible

Floor mounting system with column / Wall mounting system 

 

VIDEO

                                                                                                                               Fromm FS5 Wrapper - Wall mounting system       

General technical specificationsFromm FS5 wrapper - Wall mounting system

  Automatic program 1
  Maximum pallet format  1.100 x 1.300 mm
  Pallet height 2.200 mm / 2.500mm / 2.800mm / 3.200mm
  Maximum pallet weight depending on floor capacity
  Power supply 230V – 50/60 Hz
  Position free standing or wall mounted

                                                                                                                                                                                            

Fromm FS550           with C4 - electromagnetic film brake (up to approx. 100%) 

Semi-automatic Stretch Wrapping Machine.
You can choose between easy to operate machine with the option of A simple operating panel (OP1) or one with no less than 99 wrapping programs
and multiple pre-systems (sophisticated OP2 control panel)
The film is pre-stretched between the film carriage C4 and the pallet. The pre-stretch is adjustable by means of touch buttons on the control panel.

  Machine code 32.3110.140
  Operating panel  OP1 /OP2
  Carriage (prestretch system) C4 - electromagnetic film brake (up to approx. 100%)

 

FROMM FS590       with C6 - 1-Motor driven pre-stretch unit (up to 250%)

Semi-automatic Stretch Wrapping Machines with multiple wrapping programs and various pre-stretch systems.
Pre-stretch by means of a 1-Motor driven pre-stretch unit, enabling a controlled film feed. The film supply speed can be adjusted from the control panel. 
(Simple OP1 or sophisticated OP2 control panel).
In general FROMM advises to operate the FS590 and FS595 with POWER PRE Stretch systems in combination with OP2 control panel.
With this combination you achieve maximum flexibility from the programming point of view in combination with the maximum savings of costs.

  Machine code 32.3110.160
  Operating panel  OP2
  Carriage (prestretch system) carriage C6 with fixed ratio one motor pre-stretch system

 

FROMM FS595     with C7 -  2-Motor driven pre-stretch unit (120% - 400%)

Semi-automatic Stretch Wrapping Machines with multiple wrapping programs and various pre-stretch systems.
Pre-stretch by means of a 2-Motor driven pre-stretch unit, enabling a controlled film feed and tension towards the pallet. The film supply
speed can be adjusted from the control panel. (Simple OP1 or sophisticated OP2 control panel).
In general FROMM advises to operate the FS590 and FS595 with POWER PRE Stretch systems in combination with OP2 control panel. 
With this combination you achive maximum flexibility from the programming point of view in combination with the maximum savings of costs.

  Machine code 32.3110.170
  Operating panel  OP2
  Carriage (prestretch system) carriage C7 with adjustable two motors pre-stretch

 

Not binding query





back to: Stretchwrap Machines